1. This instrument uses the imported LED, high blue brightness sensitive. It can cure the resin which has a wavelength of 420-480nm and is used to repair the teeth in the department of stomatology.
2. LED dental orthodontics curing light use the imported SMOS components, the capability is stable, with no noise, no vibration.
3. It uses a high capacity lithium-ion charging battery, it can be used about 80-100 times when it is full of power.
4. It has an intelligent battery to check the circuit when the electric is low, it will alarm and the light will flash.
5. LED curing lights wireless has three modes: intense light, gradually light, and pulse light.
Description
– Wireless curing light with charging
– 5W big power LED
– With a maximum of more than 1500mW/cm2
– Constant light intensity. The solidification effect is not affected by the consumption of remaining power
– Elegance design, very convenient for operation
– Noiseless operation
– Low battery alert
– Three working models: strong, gradually strong, flashing
– Use import LED, big power, intensity, and longevity, save energy
– The special design of the charger base can also be used for holding the handle
– It can solidify 2-3mm deepness in a few seconds
– Can be used Worldwide 100V-240V
– With blue high sensitive brightness, it can cure the resin which a wavelength of 420-480nm
– Import SMOS components, stable, noiseless, no vibration
– High capacity lithium battery
Parameter
| Input voltage | AC110V-220V,50-60Hz |
| Battery voltage | 3.7V-4.2V |
| Battery capacity | 2200mAh |
| Wavelength | 420-480mm |
| Light intensity | 1200-1500mw/cm |
| Packing Size | 210*147*70mm |
| Color | Blue,red,yellow,black,silver,green |
