1. The new generation multiwavelength LED for producing high-intensity light at 385nm-515nm is capable of polymerizing all light-cured dental materials
2. With refined optics that create excellent light collimation across a 10mm lens, the Q7 curing light delivers optimally and consistently collimated power.
Description
1 sec cure
1. Two powerful curing modes:
P1: 2300~2500mw/cm2， much more suitable for the ceramic bracket, veneer bonding, etc.
P2: 1000~1200mW/cm2，for general applications
2. Long battery life: Over 1300 circles under 10sec mode
3. Constant light intensity output: Maintain stable light intensity while power drops lower
4 360° curing: Reach every angle
5. High light intensity, curing 2mm Resin in 1S
–Stable output power guarantees constant light so that the solidification effect is not affected by the consumption of remaining power
–Parallel light ensures more focused output energy and a better solidification effect.
–Wireless charging corresponding to the standards of wireless charging protocol is available
–Ergonomics design, excellent and comfortable handle feel during the treatment
–Light source featuring 360-degree rotation to realize curing of all directions
–Replaceable Lithium battery, Auto power-off.
Parameter
| Working voltage | AC100-240V,50/60HZ |
| Battery output voltage | 2600mAh |
| Power Output | DC 5V/1A |
| Light power | 1000-2500mW/㎝2 |
| Battery life | More than 1300 times of curing in 10 seconds |
